Autoglym Polar Blaster Snow Foam Lance, Car Wash Foam Gun For Pressure Washer Application

Uneconomical compared to rivals. Have to use 200ml in the average snow foam lance compared to most commonly 100ml of rivals. Car cleaning got a whole lot easier when we were able to buy our own pressure washers from leading brands such as Karcher & Worx. They can help to dislodge stubborn dirt and debris, leaving your car’s paintwork ready for a coat of polish and wax. There are an amazing array of pressure washer accessories and add-ons that can improve the performance of your pressure washer - and you can find them at Halfords. Attachments for pressure washers No. The Polar Blaster has been developed for use with pressure washers only, a hose will not have the required pressure or the right connector. Polar Blast is a snow foam that can be applied using a pressure washer or foam gun. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Blast can be used instead of a shampoo if the vehicle isn't heavily soiled, just ensure you rinse the vehicle with water first to remove the top layer of dirt.Our issue comes with the pricing and value for money. Up against very popular rivals such as KKD Blizzard which offer 5 litres for a similar price and with a more economical usage dilution, it becomes hard to justify Polar Blast. With such established players in the pre wash market, whilst Polar Blast may find popularity among existing Autoglym fans, we wonder if it will struggle to persuade others to switch from existing brands. A good value 5 litre offering could be a game changer. Flush through the Polar Blaster with clean water when you have finished using it to apply all intended products. One of the strongest cleaning snow foams we have used to date. Clearly lifted soiling and made removal of soiling significantly easier.

Polishing your car is a great way to fade small scratches and imperfections. Find out how with our handy guide. Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels. Keeping your car exterior clean is a great way to take care of the aesthetic of your car as well as its longevity. Follow our step by step guide.Polar Seal is a very protective coating that has been specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface which reduces the time it takes to dry the vehicle. Simply spray onto a clean, wet surface, rinse off and dry to leave behind a durable, high gloss finish. Features & Benefits: If your vehicle only has very light soiling and you are using in place of shampoo. Please rinse vehicle first before applying Polar Blast. You can either allow to dwell and rinse without agitation or agitate with a sponge or wash mitt prior to rinsing. Only a small amount of Polar Seal is required. Pour no more than 40ml (four capfuls) into your foam bottle and then add at least 200ml of water. This should be all the finished solution required to cover your vehicle. There is no benefit in using any more than 40ml as over application can compromise the finish. Aiming at the floor, pull the trigger on your pressure washer, allowing the Polar product to feed through.